Skip to main content

How to Automate Lead Follow-Up Workflows in SalesExec Without a Developer

Use Sales Workflow actions, Automated Events, and Nurture Campaigns to automate lead follow-up in SalesExec with no coding.

Written by Gabriel Buck

The Short Answer

Yes, a sales manager or admin can automate lead follow-up in SalesExec without writing code. You build it from three screens in Settings, using menus and toggles:

  • Sales Workflow actions. When a salesperson picks an outcome, such as Left Message, the action can change the lead's status, send an email or SMS template, start a nurture campaign, set an appointment, transfer the lead or release it back to the Pull queue.

  • Automated Events. These run on their own when a new lead arrives or when an action is executed. If the lead matches your criteria, they set a status, add the lead to a nurture campaign, send an email template or update lead fields. You can add a delay and limit when they run.

  • Nurture Campaigns. These are timed drips of emails, SMS texts, waits, status changes, appointments and transfers that run until the lead leaves the campaign.

​

You only need a developer or a tool like Zapier to connect SalesExec to another system, for example to send lead data to an outside endpoint or to post leads in from a form tool.

​

For how SalesExec manages leads overall, see SalesExec lead management software.

​

What You Can Automate, and Where

What you want to happen

Where you set it up

What starts it

Move a lead to the next status after a call outcome

Sales Workflow > Edit Action > Change Status or Workflow

A salesperson selects the action

Send an email or text after a call outcome

Sales Workflow > Edit Action > Send Email Template or Send Sms Template

A salesperson selects the action

Start a drip of emails and texts

Sales Workflow > Edit Action > Set Email Nurture Strategy, or Automated Events > Add To Nurture Event

An action, or a new lead

Handle every new lead the same way

Automated Events, Trigger Type New Lead

A new lead is created

Follow up after a specific outcome, with a delay

Automated Events, Trigger Type Action Executed, plus Delay (minutes)

An action is executed on the lead

Make an unreached lead available to call again later

Sales Workflow > Edit Action > Release Pull

A salesperson selects the action

Stop contacting a lead

Sales Workflow > Edit Action > Add to Do Not Contact List or Remove From Nurture

A salesperson selects the action

​

Step 1: Create Your Email and SMS Templates

Automations send templates, so create them first.

​

  • Email Templates are under Settings. The screen says "Create and review HTML and plain text emails."

  • SMS Text Templates are under Settings > Capture and Route Phone Calls + Outbound Dialing > SMS Text Templates. Group your templates with Add Group, create them with Add Template, and personalize them with lead field tokens such as {FirstName}. This screen also has Edit Opt-In Template.

​

Before you send texts, set up a phone number for SMS. See Configure a Phone Number for SMS Text Messages and SMS Profile Verification for A2P 10DLC.

​

For template details, see How To Create Email Templates and Text SMS Templates.

​

Step 2: Build a Nurture Campaign for Timed Follow-Up

A nurture campaign is the simplest way to send a series of messages over several days.

​

  1. Go to Settings > Nurture Campaigns. The page is titled Nurture Strategies.

  2. Create a strategy and fill in Name, Owner and Description. Turn on Enabled when you're ready.

  3. Add Nurture Events in the order you want them to run: Wait, Send Template (email), Send Sms Template, Change Status, Change Strategy, Create Appointment and Transfer.

​

For example, the demo account's "Air Duct New Leads" strategy alternates email templates and SMS templates, with waits of 1 to 3 days between them.

​

If you turn a strategy off, SalesExec warns that "all pending actions will be deleted" for leads in it.

Nurture Strategy edit screen in SalesExec showing the list of nurture events

​

For the full steps, including email open and click paths, see How to Create an Email Nurture Campaign and Automatically Send SMS Templates with Nurture.

​

Step 3: Start Follow-Up Automatically with an Automated Event

Automated Events run without anyone clicking a button.

​

  1. Go to Settings > Setup Lead Routing > Automated Events. The screen says "Set up trigger conditions for events and automation."

  2. Create an event. In Basic Information, set the Name, Lead Type and Trigger Type: - New Lead runs when a lead is created. - Action Executed runs after a chosen workflow action, which you pick in Trigger Criteria.

  3. Optionally set Delay (minutes). The help center says that with a delay, the lead must meet your criteria both when the trigger happens and again after the delay.

  4. In Criteria, narrow which leads qualify with Lead Criteria (for example, the lead source), Lead Field Criteria and Lead Action Criteria.

  5. Optionally set an Allowed Execution Window: a Time Zone and the time ranges when the event may run. If none is set, any time is allowed.

  6. In Events, add what should happen: Set Status Event, Add To Nurture Event, Send Email Template Event, Configuration Lead Field Updates Event or Configuration Webcall Event.

  7. Turn on Enabled and save.

​

Automated Events don't have an SMS event. To text a new lead automatically, use an Add To Nurture Event that starts a nurture campaign with a Send Sms Template step.

Automated Event edit screen in SalesExec showing trigger, criteria and event settings

​

​

Step 4: Make Each Call Outcome Trigger the Next Step

Sales Workflow actions turn each salesperson's disposition into automatic follow-up.

​

  1. Go to Settings > Setup Lead Routing > Sales Workflow. The board shows your workflows and statuses for each lead type.

  2. Click a status, such as New Lead, to open Edit Status. Its actions are grouped by category, and each has an Enabled toggle.

  3. Open an action, such as Left Message, to see Edit Action: Name, Category, Enabled and Hide from UI (API only).

  4. Under Operations, turn on what the action should do: - Change Status or Workflow, for example from New Lead to Contact Attempt 1 - Contact Attempted + Made - Send Email Template and Send Sms Template - Set Email Nurture Strategy and Remove From Nurture - Add Appointment and Add Note - Transfer Lead and Return Lead - Release Pull - Add to Do Not Contact List - Close Lead - Web Request

  5. Save the action.

Sales Workflow Edit Status screen for the New Lead status showing its actions

Sales Workflow Edit Action screen for the Left Message action showing its operations

Check your plan before you change workflows. The pricing page says SalesExec Standard ($55 per user per month) uses preconfigured workflows, and SalesExec Advanced ($72 per user per month) adds configurable workflows and dedicated support. SMS is billed separately at $0.02 per 160-character segment. See SalesExec pricing.

​

​

Example: A No-Code Follow-Up Plan for New Web Leads

This is an illustrative setup. Choose your own timing and number of attempts.

​

  1. A web lead arrives. An Automated Event with Trigger Type New Lead adds it to a nurture campaign that sends a welcome email, then a text.

  2. A salesperson calls and selects Left Message. That action moves the lead to Contact Attempt 1 and releases it back to the Pull queue so it can be called again later.

  3. When the lead books, the salesperson selects an appointment action. That action adds the appointment and removes the lead from the nurture campaign.

  4. If the lead says stop, the salesperson's action adds the lead to the Do Not Contact list.

​

Recycling Leads You Haven't Reached

Calling unreached leads again on a schedule is covered in its own article. For Release Pull, Max Allowed Assignment Time and the Unworked Leads Queue, see How to Automatically Recycle Unworked and Unreached Leads in SalesExec.

​

To call purchased leads quickly with the SalesExec Dialer (formerly RingResponse), see How to Follow Up on Purchased Internet Leads with the SalesExec Power Dialer.

​

When You Still Need a Developer or Zapier

The follow-up steps above are point-and-click. You need technical help only to connect SalesExec to other systems:

  • Sending lead data out. The Web Request action and the Configuration Webcall Event send lead data to an outside endpoint. Someone has to provide and maintain that endpoint.

  • Getting leads in. Form tools can post leads into SalesExec through Zapier. See How to Post Leads into SalesExec Using Zapier.

  • Real-time updates in another app. See Configure Webhooks via API.

​

Keep Automated Follow-Up Compliant

  • The help center says SMS sends honor opt-outs and Do Not Contact records. See How SalesExec Checks Do Not Contact (DNC) Compliance for Calls, SMS, and Email.

  • Use an Allowed Execution Window so Automated Events run only at the hours you approve.

  • Don't text or call too often. The nurture article warns that too many texts too soon can lower contact rates.

  • Test every automation on a lead with contact details you control before you enable it for live leads.

​

Frequently Asked Questions

​

Can I automate lead follow-up in SalesExec without a developer?

Yes. Sales Workflow actions, Automated Events and Nurture Campaigns are set up in Settings with menus and toggles. You need a developer only to send data to, or receive leads from, another system.

​

What is the difference between an action and an Automated Event?

A salesperson selects an action to log an outcome, and its operations run at that moment. An Automated Event runs by itself when a new lead is created or an action is executed, if the lead matches its criteria.

​

Can SalesExec send a text automatically when a new lead arrives?

Yes, through a nurture campaign. Automated Events have no SMS event, so use an Add To Nurture Event that starts a nurture campaign with a Send Sms Template step.

​

Can I delay an automated follow-up?

Yes. Set Delay (minutes) on the Automated Event, and optionally an Allowed Execution Window. With a delay, the lead must still match the criteria when the delay ends.

​

How do I stop follow-up once a lead books an appointment?

Turn on Remove From Nurture, and Change Status or Workflow, on the action your team uses for a booked appointment.

​

Which SalesExec plan lets me build my own workflows?

The pricing page lists configurable workflows on SalesExec Advanced ($72 per user per month). SalesExec Standard ($55 per user per month) uses preconfigured workflows.

​

Do automated texts respect opt-outs?

The help center says SMS sends honor opt-outs and Do Not Contact records. Test with your own number to confirm your setup.

​

Related articles

Did this answer your question?