Skip to main content

How to Automatically Recycle Unworked and Unreached Leads in SalesExec

Lead recycling is how SalesExec returns leads that were not worked, or not reached, to an active queue or follow-up path under rules you configure.

Written by Gabriel Buck

Overview

Lead recycling is how SalesExec returns leads that were not worked, or not reached, to an active queue or follow-up path under rules you configure. Instead of leaving those leads assigned to one salesperson, the system can reclaim them after a waiting period and make them available for another attempt.

Two settings do most of this work:

  • Max Allowed Assignment Time, set on each workflow status, works with the Unworked Leads Queue to reclaim leads that sit idle.

  • Release Pull, set on a workflow action, controls the minimum time before a lead can be pulled again. The Pull-based lead management article calls these waiting periods Pull Release Timers.

There is no company-wide cool-down standard. Administrators set Max Allowed Assignment Time and the Release Pull waiting period to match their sales strategy. Contact cadences should also follow applicable calling restrictions, consent requirements, and customer-experience standards. Have your legal team approve the calling hours you use.

This article covers the setup in order and links to the detailed article for each step. For a product overview of Pull distribution, including how unworked and unreached leads return to the queue, see the SalesExec Pull distribution page.

What lead recycling does

Without reassignment or recycling, some leads may remain unworked, and newer, older, or harder leads may get inconsistent attention. A salesperson can end up with more leads than they can contact, while another salesperson has capacity but no new opportunities.

In a Pull setup, leads remain at the company, corporate, or branch level and are borrowed by a user for a contact attempt. If the prospect is not contacted, the configured workflow can release the lead after a waiting period. After that period and the strategy's eligibility checks, another eligible salesperson may pull the lead from the queue.

Agents typically place these follow-up calls with the SalesExec Dialer (formerly RingResponse).

Reclaim idle leads with the Unworked Leads Queue

The Unworked Leads Queue is a Pull distribution type. It can pull leads back from Corporate, a Branch, or an individual user when a lead has gone unworked for a set period. That period is the Max Allowed Assignment Time, which you set on individual statuses in the Sales Workflow.

Administrators set Max Allowed Assignment Time for each status. There is no ClickPoint default or recommended value.

On the Edit Status dialog, Max Allowed Assignment Time is a text box that appears after Color. The screen does not show units or help text for this field. Do not assume a unit. Set the value your administrator chooses for that status, then confirm in your own tests when unworked leads become available to pull again.

How to set Max Allowed Assignment Time

  1. Go to Settings > Setup Lead Routing > Sales Workflow and open the workflow.

  2. Open the status you want to edit, then open Edit Status.

  3. In Max Allowed Assignment Time, enter the value your administrator sets for that status.

  4. Click Save.

  5. In your Pull strategy, choose the Unworked Leads Queue distribution type if you want unworked leads to be pulled back from Corporate, a Branch, or a user after that period. See How to Configure "Pull" Lead Distribution. After you change a Pull strategy, review whether the queue needs to be rebuilt.

Edit Status dialog with Max Allowed Assignment Time

Example from the demo: the New Lead status in the Free Accounts workflow. Callout: 1 – Max Allowed Assignment Time, a text box with no units shown. Your value will differ.

Re-queue unreached leads with Release Pull

Release Pull is a setting on a workflow action. It controls the minimum time before a lead can be pulled again through a distribution strategy.

There is no company-wide cool-down standard, and ClickPoint does not recommend a number of days or hours. Administrators set the waiting period to match the sales strategy and the calling hours counsel has approved.

When you turn Release Pull on, the action dialog shows Days and Hours. There is no minutes field.

Decrement Pull Count on Release is a Yes/No option on the same action dialog. The app does not show a tooltip or help text for it. Configure Actions in a Sales Workflow says that enabling it reduces the lead's pull count by one.

How to set Release Pull on an action

  1. Go to Settings > Setup Lead Routing > Sales Workflow, open the workflow, then open the status.

  2. On Edit Status, open Actions and edit the action that should release the lead (for example, a no-answer or left-voicemail action).

  3. Turn on Release Pull.

  4. Enter the Days and Hours your administrator sets. Leave a field blank when you do not need it.

  5. Set Decrement Pull Count on Release to Yes or No, as your administrator chooses.

  6. Configure any other operations the action should perform, such as Change Status or Workflow, Contact Attempted + Made, Send Email Template, or Send SMS Template, then click Save.

Edit Action dialog with Release Pull, Days, Hours, and Decrement Pull Count on Release

Example from the demo: the Left Voicemail action (Attempted Contact category) on the New Lead status in the Free Accounts workflow. Callouts: 1 – Release Pull turned on. 2 – Days and Hours (no minutes field). Hours is set to 4 in this example; this is not a recommended cool-down. 3 – Decrement Pull Count on Release, a Yes/No option, set to No in this example.

Build a contact-attempt cadence

In Settings > Setup Lead Routing > Sales Workflow, statuses are grouped by stage. How to Set Up Call-Center Lead Management in SalesExec gives examples such as New Lead, Contact Attempt 1 through 6, Sold, Nurture, and Dead. Those names are examples, not a required workflow. Your statuses can differ.

Add actions to each status for outcomes such as no answer, left voicemail, appointment set, and not interested. An action can change the status, add an appointment, send an email or text template, start a nurture strategy, transfer the lead, release it back to Pull, add it to the Do Not Contact List, or close it as won.

The workflow board below is an example from the demo, not a required layout. The Free Accounts stage includes Contact Attempt 1, Contact Attempt 2, and Contact Attempt 3.

Sales Workflow board showing the Free Accounts stage and Contact Attempt statuses

Example from the demo: the Free Accounts workflow board. Callouts: 1 – The Free Accounts stage. 2 – Contact Attempt 1, 2, and 3. Your workflow and status names will differ.

You can also use Sales Workflow - Automated Events to run steps when a new lead arrives or after an action. Event criteria can include system fields, lead fields, or the number of actions taken on a lead. An event can change the lead's status, add the lead to a nurture campaign, send an email template, update fields, or trigger a Webcall to a third-party platform.

After a salesperson records an action, they can request another lead. The Pull-based lead management article also describes Auto-Pull, which automatically retrieves the next eligible lead after the current lead is dispositioned. Auto-Pull is the term used in that help article; it was not a label on the workflow screens reviewed for this article.

The table below is an example configuration only. Your workflow, statuses, and timers are set by your administrator. It does not recommend a number of attempts or a waiting period.

Status

Example agent action

What happens next in SalesExec

New Lead

No answer or left voicemail

The action can change the status (for example, to Contact Attempt 1) and use Release Pull to start the waiting period before the lead can be pulled again.

Contact Attempt 1–5

No answer, left voicemail, or a similar no-contact outcome

The action can move the lead to the next attempt status and use Release Pull again. It can also send an email or SMS template.

Contact Attempt 6 (or your last attempt status)

Still no contact

The action can start a nurture strategy, or change the status to Nurture or Dead.

Any attempt status

Appointment set

The action can add an appointment and change the status.

Any attempt status

Not interested, or the person asks not to be contacted

The action can add the lead to the Do Not Contact List. Do not set that lead up to be pulled for another sales call.

Any attempt status

Sold

The action can close the lead as won.

How many attempts you use, and how long you wait between them, is a decision for your sales leadership and counsel. SalesExec can support a series of contact-attempt statuses; it does not prescribe how many to use.

Prioritize recycled leads against new leads

Pull Priorities control the order of leads that are already eligible for a strategy. They do not make a lead eligible if it fails the strategy's criteria or is still in a waiting period after Release Pull.

You set two priorities: Pull Count (lowest or highest first) and Date Added (newest or oldest first). The first priority sets the order; the second breaks ties. Pull Count measures pulls, not customer interest or successful contact.

Configure Pull Priorities: Pull Count and Date Added describes the combinations and notes that Pull Count: Lowest First, then Date Added: Newest First, is the default order when you create a new distribution strategy. Treat that as the documented default, not a required recycle policy. Choose the order that matches how you want new leads and previously pulled leads to compete.

You can also create more than one Pull strategy, for example separate strategies for newly received internet leads, uncontacted follow-up leads, and older opportunities that still qualify for outreach. That example is one way to encode a contact strategy; it is not a required setup.

A new Pull strategy also includes default criteria, which you can change. How to Configure "Pull" Lead Distribution lists these defaults:

  • DoNotPhone Equals False, so leads flagged Do Not Phone are not pulled for a call.

  • MaxAge Less Than 10, a default maximum age in days. If you recycle older leads, review this criterion so leads you still want to call are not excluded.

  • System Status In New Lead, Waiting, and Contacted, which you should align with the statuses in your cadence.

After you change priorities or criteria, save the strategy and rebuild the queue so the new order applies.

Recycle leads that were pushed to a salesperson

SalesExec also supports Push strategies (Round Robin and Weighted). You can use Push, Pull, or both for different lead categories and teams.

If a lead is pushed to a salesperson and then sits idle, an Unworked Leads Queue Pull strategy can make that lead available to pull again after the status's Max Allowed Assignment Time, as described above.

A workflow action can also Transfer a lead to another user, a branch, or the corporate level. Enable Distribute After Transfer if the lead should run through Push distribution again and it qualifies. See Configure Actions in a Sales Workflow and How to Configure "Push" Lead Routing.

Push strategies can use field-based criteria (including Do Not Phone and system status), distribute only to active users, and set hourly or daily limits per recipient.

Keep recycled calls within calling hours and opt-outs

Recycled leads should follow the same calling-hour and opt-out rules as new leads.

  • The Do Not Contact List can flag Do Not Phone, Do Not Email, and Do Not Text SMS. Pull criteria can exclude those leads, for example DoNotPhone Equals False.

  • An action can add a lead to the Do Not Contact List when someone opts out. After that, do not configure the lead to be called, emailed, or texted on a channel they declined.

  • Set state calling hours and holiday calling restrictions on the distribution strategy. Have your legal team approve the hours you use. SalesExec can restrict when leads are offered for a call; it does not by itself determine what the law requires.

Nurture leads you cannot reach

If a lead still should not be called after your last contact attempt, you can move it off the active calling cadence and keep in touch by email or text. An action can use Set Email Nurture Strategy, or an automated event can add the lead to a nurture campaign. Remove From Nurture removes an applied nurture strategy.

SalesExec supports email nurture campaigns, and nurture can send SMS templates automatically. See How to Create an Email Nurture Campaign and Automatically Send SMS Templates with Nurture. Honor Do Not Email and Do Not Text SMS flags before you enroll a lead.

Measure whether leads are being worked

Open Reports from the left sidebar. These reports help you see whether leads are being worked and how often they are pulled:

These reports describe activity. They do not include a target contact rate or a recommended recycle cadence.

What the settings do not cap

The Edit Action, Edit Status, and System Settings > Advanced Distribution Options screens do not show a built-in cap on pull count or a maximum number of times a lead can be recycled. In the demo, Advanced Distribution Options includes Enable Pull From Other Agents and does not include a recycle or pull-count limit.

Do not assume a hidden product maximum. Teams control how recycling works through the workflow actions and timers in this article and, as described in the Pull distribution articles, through Pull criteria and Pull priorities.

Frequently asked questions

What is lead recycling in SalesExec?

Lead recycling is the process of returning leads that were not worked or not reached to an active queue or follow-up path under rules you configure. In SalesExec, that typically means the Unworked Leads Queue with Max Allowed Assignment Time, Release Pull on workflow actions, and optional nurture when you stop active calling.

What is the Unworked Leads Queue?

The Unworked Leads Queue is a Pull distribution type that can pull leads back from Corporate, a Branch, or an individual user when a lead has gone unworked for the Max Allowed Assignment Time set on its workflow status.

Who sets Max Allowed Assignment Time?

Administrators set Max Allowed Assignment Time on each workflow status. There is no ClickPoint default or recommended value. The Edit Status dialog shows the field as a text box with no units.

What is Release Pull?

Release Pull is a setting on a workflow action that controls the minimum time before a lead can be pulled again through a distribution strategy. When it is on, the action dialog shows Days and Hours. The Pull-based lead management article refers to this waiting period as a Pull Release Timer.

Is there a recommended cool-down between call attempts?

No. There is no company-wide cool-down standard, and this article does not recommend a number of days or hours. Administrators set Days and Hours on each Release Pull action to match the sales strategy and counsel-approved calling hours.

Does recycling change a lead's pull count?

Only if you turn on Decrement Pull Count on Release. That option is a Yes/No control on the same action dialog as Release Pull. The workflow-actions article says that enabling it reduces the lead's pull count by one. The app does not show further help text for the option.

Can a different salesperson work a recycled lead?

Yes. After the waiting period and eligibility checks, another eligible salesperson may pull the lead from the queue. Recipients, criteria, calling hours, and licensing rules on the strategy still apply. The lead is not offered to everyone without those filters.

How do recycled leads compete with brand-new leads?

Pull Priorities order eligible leads by Pull Count and Date Added. You can also use separate Pull strategies for new leads and for follow-up or recycled leads. Priorities only sort leads that already qualify and are not still in a Release Pull waiting period.

Does lead recycling work with Push (round robin) distribution?

Yes. You can combine Push and Pull. An Unworked Leads Queue strategy can reclaim a lead that was pushed to a salesperson and then sat idle past Max Allowed Assignment Time. A Transfer action can also send a lead back through Push distribution when Distribute After Transfer is enabled and the lead qualifies.

How many times should we call a lead before moving it to nurture?

That depends on your sales strategy and counsel. SalesExec can use a series of contact-attempt statuses, such as Contact Attempt 1 through 6, but those names are examples of capability, not a required count. After your last attempt, an action or automated event can start a nurture strategy or change the status to Nurture or Dead.

How do we keep recycled calls within approved hours and opt-outs?

Set state calling hours and holiday restrictions on the distribution strategy, and have your legal team approve the hours you use. Use Do Not Contact flags and criteria such as DoNotPhone Equals False so opted-out leads are not pulled for a call. The SalesExec Dialer follows those same restrictions when agents place the calls.

Which reports show whether leads are being worked?

Use the Distribution Performance, Disposition Leads, Lead Penetration Rate, and Hourly Performance Snapshot reports, plus the Pull Report by Time for first, last, and total pulls. See the links in the measuring section above.

Is there a maximum number of times SalesExec will recycle a lead?

The Edit Action, Edit Status, and Advanced Distribution Options screens do not show a built-in cap on pull count or recycle count. Control how often a lead can come back through Release Pull, your last-attempt and nurture or Dead statuses, and the criteria and priorities on your Pull strategies.

Related articles

Did this answer your question?